Ko ieškote?

Įveskite paieškos žodį

Apgailestaujame!

Nieko nerasta.

Prisijungimas

Esate naujas klientas?

Registruokitės ir gaukite daug naudos:

Produkto prieinamumo patikrinimas
Greitas kitas užsakymas ir užsakymų istorija
Asmeninės produktų rekomendacijos
Mokėjimas pagal sąskaitą

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
FAQs

HK SP 740 212

Magnetspule 12VDC für HKDTDF
Nominal voltage +/- 10 %
12 V DC 
Corresponding connectors
HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A 
Power input
25 W
Parsisiuntimai PDF formatu
Register now to get access to our online shop

Register now and access our complete product range and many exclusive services.

Papildoma informacija apie gaminį

HK SP 740 212

Nominal voltage +/- 10 %
12 V DC
Corresponding connectors
HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A
Power input
25 W
Average current consumption
1.1 A
For valve type
HK DTDF
Visos savybės

Savybės

Use
  • for 2/2-way solenoid-operated directional control valve HK DTDA and HK DTDF 

Product description

Nuorodos
In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.
A rectifier is integrated into the 230 VAC coil
Aprašymas
The solenoid coil is designed for 80 % to 120 % of the nominal voltage at 100 % duty cycle.
Užsakymo nuoroda
Other types of coil available on request

Product variants

5 Results
Pavadinimas
Nominal voltage +/- 10 %
Corresponding connectors
Power input (W)
Average current consumption (A)
12 V DC 
HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A 
22 W
1.1 A
24 V DC 
HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A 
22 W
0.5 A
12 V DC 
HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A 
25 W
1.1 A
24 V DC 
HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A 
25 W
0.5 A
230 V AC 
HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 220 
25 W
0.22 A

Column selection

Nominal voltage +/- 10 %
Corresponding connectors
Power input (W)
Average current consumption (A)
For valve type