HK FI AD 0400 E0 N AF VG

Adsorberfilter Ölnebel bis 400l-Tank EW

The product image may differ

Air volume

40 m³/h

For tank size

100 to 400 litres

Oil absorption capacity max.

0.32 l

Parsisiuntimai PDF formatu

Pasirinkite versiją

Rodyti prekių lentelę

HK FI AD 0400 E0 N AF VG HK FI AD 0800 E0 N AF VG HK FI AD 1800 E0 N AF VG

Registruokitės dabar, kad pasiektumėte mūsų internetinę parduotuvę.

Mūsų klientų aptarnavimas: +49-421-48907-766

Papildoma informacija apie gaminį

HK FI AD 0400 E0 N AF VG

Air volume

40 m³/h

For tank size

100 to 400 litres

Oil absorption capacity max.

0.32 l

Activated carbon fill quantity

0.9 kg

326 mm

110 mm

114 mm

G 1″ -11

Visos savybės

Savybės

Design

Disposable oil mist adsorber, without valves
integrated filter element 3 µm

Installation position

vertical

Temp. min.

-40 °C

Temp. max.

80 °C

Material

Housing: PA6, PC, PVC
seal: FKM (FPM)

Connector

BSPP male thread, parallel

Connection position

at bottom

Customs tariff number

84213925

Visos savybės

Gaminio aprašymas

Nuorodos

The oil mist adsorber filter must be completely replaced after saturation.
Design basis are medium, tank volume and evaporated oil volume.

Aprašymas

The oil mist adsorber filters of the HK FI AD E0 VG series are disposable oil mist separators without valves.
They are suitable for indoor and outdoor use on hydraulic units, gearboxes, barrels and IBCs.
The plastic housing is filled with activated carbon.
In combination with a splash guard and oil demister, the activated carbon cleans the air flowing out of the system and thus protects the environment from contamination by oil aerosols.
If the adsorber is saturated (discoloration of the white silica gel layer), it is replaced.

Papildoma informacija

The oil mist adsorber filter binds the oil particles contained in the outflowing air.
Larger oil aerosols stick to the metal demister, condense and drip back into the tank. The smaller oil aerosols are bound in the pores of the activated carbon.
The saturation (loading) and the necessary replacement of the filter cartridge is indicated by a colour change of the white layer from colourless to brown.
The adsorber is completely replaced after saturation.
Activated carbon mainly consists of carbon with a highly porous structure. The pores are interconnected like a sponge. Activated carbon mainly consists of carbon with a highly porous structure. The pores are interconnected like a sponge.
The inner surface is between 300 and 2000 m²/g coal, so the inner surface of four grams of activated carbon corresponds approximately to the area of a soccer field. The density of activated carbon is in the range of 0.2 to 0.6 g/cm³.
Activated carbon binds non-polar substances (substances that cannot be mixed with water) in the internal pores.

Užsakymo nuoroda

For mounting on the tank, the KH FI AD FS FILL filling flange is required.
For mounting on the tank, the KH FI AD FS FILL filling flange is required.