Christmas / New Year shipping times

Our central warehouses will be closed from 23.12.2024 to 01.01.2025. Incoming orders will not be shipped during this period. If necessary, you are welcome to use our branch network during this time. Customer service will be available as usual.

HK FI AD 0800 E0 N AF VG

Adsorberfilter Ölnebel bis 800l-Tank EW

The product image may differ

Air volume

180 m³/h

For tank size

400 to 800 litres

Oil absorption capacity max.

0.8 l

Download PDF

Please choose a variant

Show table of articles

HK FI AD 0400 E0 N AF VG HK FI AD 0800 E0 N AF VG HK FI AD 1800 E0 N AF VG

Our customer service: +49-421-48907-766

Product details for

HK FI AD 0800 E0 N AF VG

Air volume

180 m³/h

For tank size

400 to 800 litres

Oil absorption capacity max.

0.8 l

Activated carbon fill quantity

2.2 kg

364 mm

150 mm

154 mm

G 1″ -11

All characteristics

Characteristics

Design

Disposable oil mist adsorber, without valves
integrated filter element 3 µm

Installation position

vertical

Temp. min.

-40 °C

Temp. max.

80 °C

Material

Housing: PA6, PC, PVC
seal: FKM (FPM)

Connection

BSPP male thread, parallel

Connection position

at bottom

Customs tariff number

84213925

All characteristics

Product description

Notes

The oil mist adsorber filter must be completely replaced after saturation.
Design basis are medium, tank volume and evaporated oil volume.

Description

The oil mist adsorber filters of the HK FI AD E0 VG series are disposable oil mist separators without valves.
They are suitable for indoor and outdoor use on hydraulic units, gearboxes, barrels and IBCs.
The plastic housing is filled with activated carbon.
In combination with a splash guard and oil demister, the activated carbon cleans the air flowing out of the system and thus protects the environment from contamination by oil aerosols.
If the adsorber is saturated (discoloration of the white silica gel layer), it is replaced.

Further information

The oil mist adsorber filter binds the oil particles contained in the outflowing air.
Larger oil aerosols stick to the metal demister, condense and drip back into the tank. The smaller oil aerosols are bound in the pores of the activated carbon.
The saturation (loading) and the necessary replacement of the filter cartridge is indicated by a colour change of the white layer from colourless to brown.
The adsorber is completely replaced after saturation.
Activated carbon mainly consists of carbon with a highly porous structure. The pores are interconnected like a sponge. Activated carbon mainly consists of carbon with a highly porous structure. The pores are interconnected like a sponge.
The inner surface is between 300 and 2000 m²/g coal, so the inner surface of four grams of activated carbon corresponds approximately to the area of a soccer field. The density of activated carbon is in the range of 0.2 to 0.6 g/cm³.
Activated carbon binds non-polar substances (substances that cannot be mixed with water) in the internal pores.

Ordering information

For mounting on the tank, the KH FI AD FS FILL filling flange is required.